ResultsFor more information about RAID arrays, see the IBM Redbooks ® publicationsabout RAID arrays at http://www.redbooks.ibm.com/abstracts/tips0054.html.IBM Advanced Settings Utility programThis topic provides information about the IBM Advanced Settings Utility program.The IBM Advanced Settings Utility (ASU) program is an alternative to the Setuputility for modifying UEFI settings. Use the ASU program online or out of band tomodify UEFI settings from the command line without the need to restart the serverto access the Setup utility.You can also use the ASU program to configure the optional remote presencefeature or other IMM settings. The remote presence feature provides enhancedsystems-management capabilities.In addition, the ASU program provides limited settings for configuring the IPMIfunction in the IMM through the command-line interface.Use the command-line interface to issue setup commands. You can save any of thesettings as a file and run the file as a script. The ASU program supports scriptingenvironments through a batch-processing mode.For more information and to download the ASU program, go tohttp://www.ibm.com/support/entry/portal/docdisplay?lndocid=TOOL-ASU orcomplete the following steps.Note: Changes are made periodically to the IBM Web site. The actual proceduremight vary slightly from what is described in this document.1. Go to http://www.ibm.com/systems/support/.2. Under Product support, click System x.3. On the left side of the page, click Systems Management software.4. Under Configuration, click Advanced Settings Utility.Updating IBM Systems DirectorThis topic provides instructions for updating IBM Systems Director.About this taskIf you plan to use IBM Systems Director to manage the server, you must check forthe latest applicable IBM Systems Director updates and interim fixes.Note: Changes are made periodically to the IBM website. The actual proceduremight vary slightly from what is described in this document.To locate and install a newer version of IBM Systems Director, complete thefollowing steps:Procedure1. Check for the latest version of IBM Systems Director:a. Go to http://www.ibm.com/systems/management/director/downloads.html.Chapter 6. Configuration information and instructions 217
