Table 19. C2001000 to C20082FF checkpoints (continued)v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed inthe Action column until the problem is solved. If an action solves the problem, you can stop performing theremaining actions.v See Chapter 3, “Parts listing, Type 8406,” on page 229 to determine which components are CRUs and whichcomponents are FRUs.Progress code Description ActionC2004100 Waiting for load source device to enlist 1. Go to “Recovering the system firmware” onpage 220.2. Replace the system-board, as described in“Replacing the FRU system-board andchassis assembly” on page 260.C2004200 Load source device has enlisted 1. Go to “Recovering the system firmware” onpage 220.2. Replace the system-board, as described in“Replacing the FRU system-board andchassis assembly” on page 260.C2004300 Preparing connection to load sourcedevice 1. Go to “Recovering the system firmware” onpage 220.2. Replace the system-board, as described in“Replacing the FRU system-board andchassis assembly” on page 260.C20043FF Load source device is connected 1. Go to “Recovering the system firmware” onpage 220.2. Replace the system-board, as described in“Replacing the FRU system-board andchassis assembly” on page 260.C2006000 Locating first LID information on theload source 1. Go to “Recovering the system firmware” onpage 220.2. Replace the system-board, as described in“Replacing the FRU system-board andchassis assembly” on page 260.C2006005 Clearing all partition main store 1. Go to “Recovering the system firmware” onpage 220.2. Replace the system-board, as described in“Replacing the FRU system-board andchassis assembly” on page 260.C2006010 Locating next LID information on theload source 1. Go to “Recovering the system firmware” onpage 220.2. Replace the system-board, as described in“Replacing the FRU system-board andchassis assembly” on page 260.C2006020 Verifying LID information 1. Go to “Recovering the system firmware” onpage 220.2. Replace the system-board, as described in“Replacing the FRU system-board andchassis assembly” on page 260.98 Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)
