Table 25. 101-711 through FFC-725 SRNs (continued)SRN FFC Description and Action2E23-604 2E23 Error log analysis indicates transmission errors.1. Check the BladeCenter management-module event log. If an error was recordedby the system, see “POST progress codes (checkpoints)” on page 84.2. Replace any parts reported by the diagnostic program.3. Replace the system-board.2E33-201 2E33 221 Adapter configuration error.1. Check the BladeCenter management-module event log. If an error was recordedby the system, see “POST progress codes (checkpoints)” on page 84.2. Replace any parts reported by the diagnostic program.3. Replace the system-board.2E33-601 2E33 Download firmware error.1. Check the BladeCenter management-module event log. If an error was recordedby the system, see “POST progress codes (checkpoints)” on page 84.2. Replace any parts reported by the diagnostic program.3. Replace the system-board.2E33-602 2E33 EEPROM read error.1. Check the BladeCenter management-module event log. If an error was recordedby the system, see “POST progress codes (checkpoints)” on page 84.2. Replace any parts reported by the diagnostic program.3. Replace the system-board.2E33-701 2E33 221 Permanent adapter failure.1. Check the BladeCenter management-module event log. If an error was recordedby the system, see “POST progress codes (checkpoints)” on page 84.2. Replace any parts reported by the diagnostic program.3. Replace the system-board.FFC-724 FFC Temporary device bus interface problem.1. Check the BladeCenter management-module event log. If an error was recordedby the system, see “POST progress codes (checkpoints)” on page 84.2. Replace any parts reported by the diagnostic program.3. Go to “Performing the checkout procedure” on page 184.FFC-725 FFC Temporary device bus interface problem.1. Check the BladeCenter management-module event log. If an error was recordedby the system, see “POST progress codes (checkpoints)” on page 84.2. Replace any parts reported by the diagnostic program.3. Go to “Performing the checkout procedure” on page 184.156 Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)
