Table 29. Failing function codes 151 through 2E33 (continued)FFC Description and notes2D02 System-board and chassis assembly (generic USB reference to controller/adapter)2E00 Qlogic 4Gb Fibre Channel and Broadcom 1 Gb Ethernet Combo2E10 Qlogic 4Gb Fibre Channel and Broadcom 1 Gb Ethernet Combo2E12 QLogic 8Gb Fibre Channel Expansion Card, (CFFh/PCIe)2E13 QLogic 4Gb Fibre Channel 1Xe PCI-Express Expansion Card (CIOv)2E14 QLogic 8Gb Fibre Channel 1Xe PCI-Express Expansion Card (CIOv)2E15 Qlogic 8Gb PCI-E FC Blade Expansion Adapter2E21 QLogic 10Gb FCoCEE daughtercard2E22 QLogic 10Gb FCoCEE daughtercard2E33 Gigabit Ethernet-SX CFFh AdapterError logsThe power-on self-test (POST), the POWER Hypervisor ™ (PHYP), and the service processor write errorsto the BladeCenter management module event log.Select the Monitors > Event Log option in the management module Web interface to view entries that arecurrently stored in the management-module event log. This log includes entries for events that aredetected by the blade servers. The log displays the most recent entries first.The following table shows the syntax of a nine-word B700xxxx SRC as it might be displayed in the eventlog of the management module.The first word of the SRC in this example is the message identifier, B7001111. This example numbers eachword after the first word to show relative word positions. The seventh word is the direct select address,which is 77777777 in the example.Table 30. Nine-word system reference code in the management-module event logIndex Sev Source Date/Time Text1 E Blade_05 01/21/2008,17:15:14(PS700-BC1BLD5E) SYS F/W: Error. Replace UNKNOWN(5008FECF B7001111 22222222 33333333 44444444 5555555566666666 77777777 88888888 99999999)Depending on your operating system and the utilities you have installed, error messages might also bestored in an operating system log. See the documentation that comes with the operating system for moreinformation.Chapter 2. Diagnostics 183
