VQUICK REFERENCE GUIDE■ Repeater operation1. Setting duplexqWhile pushing and holding[FUNC], push and hold [SQL](ATT•SET) for 1 sec. to enter setmode.w Rotate [DIAL] to select “DUP.”eWhile pushing and holding[FUNC], rotate [DIAL] to selectminus duplex or plus duplex.rPush [SQL] (ATT•SET) to exit set mode.2. Repeater toneqWhile pushing and holding[FUNC], push and hold [SQL](ATT•SET) for 1 sec. to enter setmode.wRotate [DIAL] to select“T/TSQL.”eWhile pushing and holding[FUNC], rotate [DIAL] to selectthe repeater tone activation.rPush [SQL] (ATT•SET) to exit set mode.NOTE: The transceiver can transmit a 1750 Hz tone burst.Push [PTT] briefly, then push and hold [PTT] for 1 to 2sec. to transmit a 1750 Hz tone burst. (p.23)ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519SCANSETS.MW[SQL][FUNC][DIAL]ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519 ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519SCANSETS.MW[SQL][FUNC][DIAL]
