397 SCAN OPERATIONYou can set the selected memory channel as a skip channelwhich is skipped during memory skip scan. In addition, it canbe set as a skip channel for both memory skip scan and fre-quency skip scan. These are useful to speed up the scan in-terval.q Select a memory channel:➥ Push [V/M] (SKIP •S.MW) to select memory mode.➥ Rotate [DIAL] to select the desired channel to be a skipchannel/frequency.wPush and hold [V/M] (SKIP •S.MW) for 1 sec. to enter selectmemory write mode.ePush [CALL] (MODE •SCAN ) several times to select “SKIP.”• While pushing and holding [CALL] (MODE•SCAN), rotating [DIAL]can also select “SKIP.”rRotate [DIAL] to select the skip condition from “SKIP,”“PSKIP” or “OFF” for the selected channel.• OFF : The channel or programmed frequency is scanned dur-ing any scan.• SKIP : The channel is skipped during memory or bank scan.• PSKIP : The channel is skipped during memory/bank scan andthe programmed frequency is skipped during VFO scan,such as programmed scan.SCANS.MWSETATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519• Skip settingSCANAfter 1 sec.Setting indication[DIAL]SCANS.MWSETATTDTCST SQLWFMAM -DUPLOWVOL PRIO PSKIPMR519S.MW[DIAL]■ Skip channel/frequency settingPush Push and hold Dual operation
