Icom IC-E7 Instruction Manual

Also see for IC-E7: Service manual Service manual Instruction manual

Contents

Icom IC-E7 Instruction Manual Manual pdf 42 page image

296 MEMORY/CALL CHANNELSThis function transfers a memory channel’s contents to a VFO(or another memory channel). This is useful when searchingfor signals around a memory channel frequency and for re-calling the offset frequency, subaudible tone frequency etc.D Memory➪VFOq Select the memory channel to be copied.➥ Push [V/M] (SKIP •S.MW) momentarily to select memorymode, then rotate [DIAL] to select the desired memorychannel.• Select the bank channel with [BAND] ( TS•LOCK ) and [DIAL],if desired.wPush and hold [V/M] (SKIP •S.MW) for 1 sec. to enter selectmemory write mode.• 1 short and 1 long beep sound.• “ ” indicator and memory channel number blink.e Rotate [DIAL] to select “VF.”r Push and hold [V/M] (SKIP •S.MW) for 1 sec. again.• VFO mode is selected automatically.Pushing and holding [V/M] ( SKIP • S . MW ) for 2 sec. at thestep w, can also copies the memory contents to VFO. Inthis case, steps e and r are not necessary.D Memory➪memoryq Select the memory channel to be transferred.➥ Push [V/M] (SKIP•S.MW) to select memory mode, then ro-tate [DIAL] to select the desired memory channel.wPush and hold [V/M] (SKIP •S.MW) for 1 sec. to enter selectmemory write mode.• 1 short and 1 long beep sound.• “ ” indicator and memory channel number blink.• Do not hold [V/M] (SKIP•S.MW) for more than 1 sec. otherwise thememory contents will be copied to VFO.e Rotate [DIAL] to select the target memory channel.rPush and hold [V/M] (SKIP •S.MW) for 1 sec. again to trans-fer.[EXAMPLE]: Copying channel 20 to 51.ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIP MR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519S.MW Push for 1 sec. RotateS.MW Push for 1 sec.S.MWSelect memory channel■ Copying memory contents