Icom IC-E7 Instruction Manual

Also see for IC-E7: Service manual Service manual Instruction manual

Contents

Icom IC-E7 Instruction Manual Manual pdf 38 page image

256 MEMORY/CALL CHANNELSThe IC-E7 has a total of 18 banks (A to H, J, L, N, O to R, T, Uand Y) . Regular memory channels, 000 to 999, may assignedinto a desired bank for easy memory management.qPush and hold [V/M] (SKIP •S.MW) for 1 sec. to enter selectmemory write mode.• 1 short and 1 long beep sound.• “ ” indicator and memory channel number blink.w Rotate [DIAL] to select the desired memory channel.eWhile pushing and holding [CALL] ( MODE • SCAN ), rotate[DIAL] to select “BANK.”• After releasing [CALL] ( MODE • SCAN ), “-- -- -- --” is displayed in-stead of the frequency indication, and only “ ” indicator blinks.• Bank group and channel number is displayed if the selectedmemory channel has already been assigned to a bank.• “BANK” can also be selected by pushing [CALL] ( MODE • SCAN )several times.rWhile pushing and holding [BAND] ( TS • LOCK ), rotate[DIAL] to select the desired bank.• Banks A to H, J, L, N, O to R, T, U and Y are available.• The bank can also be selected by pushing [BAND] ( TS • LOCK )several times.t Rotate [DIAL] to select the desired bank channel number.• Vacant bank channel numbers are only be displayed.yPush and hold [V/M] (SKIP•S.MW) for 1 sec. to set the chan-nel into the bank.• Return to the previous indication.ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519Bank channel is selected withATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519Bank is selected with +SCANS.MWSETATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519S.MW[DIAL]After [CALL]releasedSCAN■ Memory bank setting