Icom IC-E7 Instruction Manual

Also see for IC-E7: Service manual Service manual Instruction manual

Contents

Icom IC-E7 Instruction Manual Manual pdf 17 page image

41PANEL DESCRIPTION1r PRIORITY WATCH INDICATOR (p. 43)Appears when priority watch is in use.t LOW POWER INDICATOR (p. 16)➥ “LOW” appears when the low output power is selected.➥ No indicator appears when the high output power is se-lected.y S/RF METER➥ Shows the relative signal strength while receiving sig-nals. (p. 13)➥ Shows the output power level while transmitting. (p. 16)u SKIP INDICATORS (p. 39)➥ “SKIP” appears when the selected memory channel isset as a skip channel.➥ “PSKIP” appears when the displayed frequency is setas a skip frequency.i MEMORY CHANNEL NUMBER INDICATOR➥ Shows the selected memory channel number. (pgs. 12,24)➥ “C” appears when the call channel is selected. (p. 12)➥ “L” appears when the lock function is active. (p. 18)o MEMORY INDICATOR (pgs. 12, 24)Appears when memory mode is selected.!0 AUTO WRITE CHANNEL INDICATOR (p. 38)Appears when auto write channel is selected.!1 ATTENUATOR INDICATOR (p. 15)Appears when the RF attenuator is in use.!2 TONE INDICATORS➥ “T” appears while the subaudible tone encoder is in use.(p. 21)➥ “T SQL” appears while the tone squelch function is inuse. (p. 45)➥ “DTCS” appears while the DTCS squelch function is inuse. (p. 45)➥ “S” appears with the “T SQL” or “DTCS” indicatorwhile the pocket beep function (with CTCSS or DTCS) isin use. (p. 45)!3 DUPLEX INDICATORS (p. 19)“DUP” appears when plus duplex, “–DUP” appears whenminus duplex (repeater operation) is selected.!4 OPERATING MODE INDICATOR (p. 14)Shows the selected operating mode.• FM, WFM and AM are available.