VIQUICK REFERENCE GUIDEQuick reference guide■ Memory programmingThe IC-E7 has a total of 1250 memory channels (including200 auto write channels and 50 scan edges) for storing oftenused operating frequency, mode, etc.1. Setting frequencyIn VFO mode, set the desired receive frequency mode.• When “ ” indicator is displayed, push [V/M] (SKIP •S.MW) to selectthe VFO mode.2. Selecting a memory channelPush [V/M] (SKIP•S.MW) for 1 sec. toenter select memory write mode( 1 short and 1 long beep sound) ,then rotate [DIAL] to select the de-sired memory channel.• “ ” indicator and memory channelnumber blink.• To cancel and exit select memory write mode, push [V/M](SKIP•S .MW) momentarily.3. Writing a memory channelPush and hold [V/M] ( SKIP • S . MW ) for 1 sec. until 3 beepssound.• Memory channel number automatically increases when continuingto push [V/M] (SKIP •S.MW) after programming.SCANSETS.MW[V/M]ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519SCANSETS.MW[DIAL][V/M]
