6011OTHER FUNCTIONSCloning allows you to quickly and easily transfer the pro-grammed contents from one transceiver to another; or datafrom a personal computer to a transceiver using the optionalCS-P7 CLONING SOFTWARE.D Cloning between transceiversq Master transceiver:While pushing and holding [CALL] ( MODE • SCAN ), turnpower ON to enter cloning mode.• The master transceiver is used to send data to the sub-trans-ceiver.Sub-transceiver:While pushing and holding [V/M] ( SKIP • S . MW ), turn powerON to enter cloning mode.wConnect the OPC-474 cloning cable to the [MIC/SP] jackof the master and sub-transceivers.ePush [SQL] (ATT•SET) on the master transceiver.• The transceiver show following indications.rWhen cloning is finished, turn power OFF, then ON to exitcloning mode.ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519DuringcloningAftercloningMaster transceiverindicationsSub-transceiverindicationsto [MIC/SP] to [MIC/SP]Mastertransceiver Sub-transceiverATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519MastertransceiverSub-transceiverSCANS.MW“CLONE” and “m” appear “CLONE” appears1011■ Data cloning AT POWER ON
