6211OTHER FUNCTIONSTV channel operation is available only when TV channels areprogrammed using the optional CS-P7 CLONING SOFTWARE .(p. 61)D TV channel receivingq Push [V/M] (SKIP •S.MW) to select VFO mode, if necessary.w Push [BAND] ( TS • LOCK ) several times to select the TVchannel band.• “tV” and channel number appear.• While pushing and holding [BAND] ( TS • LOCK ), rotating [DIAL]also selects the TV channel band.e Rotate [DIAL] to select the desired channel.• While pushing and holding [FUNC], rotating [DIAL] selects theall channels including skip channel.D Skip channel settingUnwanted channels can be skipped for rapid selection, etc.q Rotate [DIAL] to select the channel to be skipped.• To clear the skip setting, rotate [DIAL] while pushing and holding[FUNC] to select a skip channel.w While pushing and holding [FUNC], push [V/M](SKIP •S.MW) to toggle the skip setting ON and OFF.• “SKIP” appears when the channel is set as skip channel.D Automatic TV channel programmingTV channels can be programmed automatically.➥ Push and hold [CALL] (MODE •SCAN ) for 1 sec. to start TVchannel programming.• The programming will automatically stop when scanning allchannels.11Push Push and hold Dual operation■ TV channel operation
