Icom IC-E7 Instruction Manual
Also see for IC-E7: Service manualService manualInstruction manual
                                                                                                | |
Contents
| 
286MEMORY/CALL CHANNELSDuring memory mode operation, the programmed memoryname, bank name or the channel number can be displayedinstead of the frequency at your preference.q Push [V/M] (SKIP •S.MW) to select memory mode.• [BAND] ( TS•LOCK ) to select the desired bank.wWhile pushing and holding [FUNC], push [BAND]( TS • LOCK ) momentarily to select display type from fre-quency, bank name, memory name and channel numberdisplay.DD Selecting bank channel indicationDuring bank channel operation, the bank channel number canalso be displayed instead of the memory channel number in-dication.➥ After selecting channel number indication as described atleft, push [BAND] ( TS•LOCK ) to select the desired bank.Or while pushing and holding [BAND] ( TS • LOCK ), rotate[DIAL] to select the desired bank.ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519Push [BAND]Memory channel No. indication Bank channel No. indicationBank channel No. indicationAuto write channel No.SCANS.MWSETATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519When no memory or bankname is programmed with theselected memory channel,frequency is displayed on thefunction display.Push [BAND] momentarilywhile pushing [FUNC]■ Selecting display type6Push Push and hold Dual operation |
Related manuals for Icom IC-E7
manualsdatabase
Your AI-powered manual search engine