Icom IC-E7 Instruction Manual
Also see for IC-E7: Service manualService manualInstruction manual
                                                                                                | |
Contents
| 
8116 POCKET GUIDEqwe■ Memory bank channel selectionPush [V/M] to selectmemorymode.Push [BAND] several times, orwhile pushing and holding[BAND], rotate [DIAL] to selectthe desired bank group.Rotate [DIAL] to select the de-sired bank channel.qw■ Call channel selectionPush [CALL] to selectcallchannel mode.Rotate [DIAL] to select the de-sired call channel.• Push [CALL] again or push [V/M] toreturn to the previous condition.qwer■ Memory channel programmingSet the desired frequency andother functions inVFO mode.Push and hold [V/M] for 1 sec.to enterselect memory writemode.• 1 short and 1 long beeps sound.Rotate [DIAL] to select the de-sired memory channel number.Push and hold [V/M] for 1 sec.again to program the contentsinto the selected channel.• 3 beeps sound.qwe■ Scan skip settingPush [V/M] to selectmemorymode.Rotate [DIAL] to select the de-sired memory channel.While pushing and holding[FUNC], push [V/M] to set theskip setting (skip channel orskip frequency) ON and OFF.qw■ VFO scansPush [V/M] to selectVFOmode.Push and hold [CALL] for 1 sec.• One of scan type “ALL,” “BAND” or“PROG xx” (xx= 0–24) appears.erRotate [DIAL] to select the de-sired scan type. Push [CALL]again to start the scan.• Rotate [DIAL] to change the scan-ning direction.• During scan, push [V/M] to start automemory write scan.Push [CALL] again to stop thescan.erRotate [DIAL] to select the de-sired scan type. Push [CALL]again to start the scan.• Rotate [DIAL] to change the scan-ning direction.Push [CALL] again to stop thescan.qw■ Memory scansPush [V/M] to selectmemorymode.Push and hold [CALL] for 1 sec.• One of scan type “M ALL,” “B ALL,”“B LINK” or “BANK” appears, ifmemory banks are assigned. |
Related manuals for Icom IC-E7
manualsdatabase
Your AI-powered manual search engine