Icom IC-E7 Instruction Manual
Also see for IC-E7: Service manualService manualInstruction manual
                                                                                                | |
Contents
| 
16POCKET GUIDEImportant operating instructions are summed up inthis and the following page for your simple reference.By cutting along the line and folding on the dottedline, it will become a card sized operating guide whichcan easily be carried in a card case or wallet, etc. q Cut w Fold r Completee Fold80qweriE7■ VFO and memory mode selectionPOCKET GUIDEPush [V/M] to toggle betweenVFO andmemory mode.➥■ Operating mode selectionWhile pushing and holding[FUNC], push [CALL] severaltimes to select the desiredmode.➥■ Audio level settingPush [Y] to increase, push [Z]to decrease the audio level.➥■ Squelch level settingWhile pushing [SQL], rotate[DIAL] to set the squelch level.➥■ Frequency band selectionPush [BAND] several times, orwhile pushing and holding[BAND], rotate [DIAL] to selectthe desired frequency band.➥■ Tuning step selectionWhile pushing and holding [FUNC],push [BAND] to enter tuning stepselection. Then rotate [DIAL] toselect the desired tuning step.• Push [BAND] again to return to theprevious condition.➥■ Monitor functionPush and hold [SQL].• The 1st segment of S/RF meter blinks.➥■ 1750 Hz tone burstPush [PTT] briefly, then push andhold [PTT] again for 1 to 2 sec.➥■ Key lock functionWhile pushing and holding [FUNC],push [BAND] for 1 sec. to togglethe key lock function ON and OFF.• “ L ” appears when the lock function isin use.➥■ Set mode settingWhile pushing and holding[FUNC], push and hold [SQL]for 1 sec. to enterset mode.Rotate [DIAL] to select the de-sired item.While pushing and holding[FUNC], rotate [DIAL] to setthe desired value or condition.Push [SQL] to exitset mode.qw■ Frequency settingPush [V/M] to selectVFOmode.Rotate [DIAL] to set the de-sired operating frequency.• While pushing [FUNC], dial rota-tion changes frequency in 1 MHzsteps.qw■ Memory channel selectionPush [V/M] to selectmemorymode.Rotate [DIAL] to set the de-sired memory channel.• While pushing [FUNC], dial rota-tion changes memory channel in10 channels steps.■ Attenuator functionWhile pushing and holding[FUNC], push [SQL] to togglethe attenuator function ON andOFF.• “ATT” appears when the attenuatorfunction is in use.➥■ Transmit power settingWhile pushing and holding[FUNC], push [PTT] to togglethe transmit output power Highand Low.• “LOW” appears when the low out-put power is selected.➥ |
Related manuals for Icom IC-E7
manualsdatabase
Your AI-powered manual search engine