Icom IC-E7 Instruction Manual

Also see for IC-E7: Service manual Service manual Instruction manual

Contents

Icom IC-E7 Instruction Manual Manual pdf 45 page image

326MEMORY/CALL CHANNELS■ Erasing/transferring bank contentsThe bank contents of programmed memory channels can becleared or reassigned to another memory bank.INFORMATION: Even if the memory bank contents arecleared, the memory channel contents still remain pro-grammed.qSelect the desired bank contents to be transferred orerased from the bank.➥ Push [V/M] (SKIP •S.MW) to select memory mode.➥ While pushing and holding [BAND] ( TS • LOCK ), rotate[DIAL] to select the desired memory bank.➥ Rotate [DIAL] to select the bank channel.wPush and hold [V/M] (SKIP •S.MW) for 1 sec. to enter selectmemory write mode.• 1 short and 1 long beeps sound.• Displays the original memory channel number automatically and“ ” indicator and memory channel number blink.• Do not hold [V/M] (SKIP•S.MW) for more than 2 sec. otherwise thebank contents will be copied to VFO.eWhile pushing and holding [CALL] ( MODE • SCAN ), rotate[DIAL] to select “BANK.”• Pushing [CALL] (MODE •SCAN ) several times, “BANK” is also se-lectable.rWhile pushing and holding [BAND] ( TS • LOCK ), rotate[DIAL] to select the desired bank to receive the transferredinformation or erase the bank contents.• Select “-- -- -- --” indication when erasing the contents from thebank.t Rotate [DIAL] to select the desired bank channel.yWhile pushing and holding [CALL] ( MODE • SCAN ), rotate[DIAL] to select “S.MW.”• Pushing [CALL] (MODE •SCAN ) several times, “S.MW” is also se-lectable.u Push and hold [V/M] (SKIP •S.MW) for 1 sec.• 3 beeps sound.ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519When transferring When erasingATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519ATTDTCST SQLWFMAM -DUPLOWVOL PRIO P SKIPMR519Push for 1 sec.S.MW6Push Push and hold Dual operation