Icom IC-E7 Instruction Manual

Also see for IC-E7: Service manual Service manual Instruction manual

Contents

Icom IC-E7 Instruction Manual Manual pdf 7 page image

IIQUICK REFERENCE GUIDED Charging the batteryRRWARNING!:NEVER charge any other than the specified battery pack.D Charging descriptionqPlug the AC adapter into an AC outlet; or the optional CP-21LR into a cigarette lighter socket.wInsert the adapter plug into [12~16V DC INPUT] of the BC-164 BATTERY CHARGER .eInstall the BP-243 BATTERY PACK (see left page) to thetransceiver.rBe sure to turn OFF the transceiver, then charge the bat-tery with transceiver.• Takes approximately 3 hours for fully charge with the suppliedBP-243 battery pack.• Charging indicator of BC-164 lights or blinks as follows.* It may be charging outside of the specified temperature range: +5˚C to+35˚C (+41˚F to +95˚F). Restore the specified temperature range andreinsert the transceiver.NOTE: The transceiver has battery indicator to show thefollowing information.• No indicator appears when the installed battery pack hasample capacity.• “ ” (battery indicator) appears when the battery packis nearing exhaustion.• “ ” blinks when the battery pack must be charged.• “ ” and “LOW” indicator appear just before the batterypack is completely discharged and display turns OFF.BC-164ChargingindicatorTransceiver to [12~16V DC INPUT] jackAC adapterto cigarettelighter socketto AC outletSCANSETS.MWOptional CP-21LRCigarette lighter cablewith noise filterQuick reference guideCharging indicator status Charging statusLights orange ChargingLights green Charging is completedBlinking red Charging error*