Icom IC-E7 Instruction Manual
Also see for IC-E7: Service manualService manualInstruction manual
                                                                                                | |
Contents
| 
347SCAN OPERATION67Scanning searches for signals automatically and makes iteasier to locate new stations for contact or listening purposes.There are 7 scan types and 4 resume conditions to suit youroperating needs.FULL SCAN (p. 35) Repeatedly scans all frequen-cies over all bands.Some frequency ranges arenot scanned according to thefrequency coverage of thetransceiver’s version.495kHz999.990MHzScanJumpSELECTED BAND SCAN(p. 35)Repeatedly scans all frequen-cies over the entire selectedband.BandedgeBandedgeScanJumpALL/SELECTED BANKSCAN (p. 37)Repeatedly scans all bankchannels or selected bankchannels. Skip scan is alsoavailable.SKIPSKIPA99 A03A00 A01 A02A04A98 A05FREQUENCY/MEMORYSKIP FUNCTION (p. 39)Skips unwanted frequenciesor channels that inconve-niently stop scanning. Thisfunction can be turned ONand OFF by pushing [FUNC]+ [V/M] ( SKIP • S . MW ) in eitherVFO or memory mode.BandedgeBandedgeScanSKIP SKIPJumpPROGRAMMED SCAN(p. 35)Repeatedly scans betweentwo user-programmed fre-quencies. Used for checkingfor frequencies within a speci-fied range such as repeateroutput frequencies, etc.Bandedge xxA xxbBandedgeScan edgesScanJumpMEMORY (SKIP) SCAN(p. 37)Repeatedly scans memorychannels except those set asskip channels. Skip channelscan be turned ON and OFFby pushing [FUNC] + [V/M](SKIP •S .MW) in memory mode.SKIPSKIPM 0 M 4M 1 M 2 M 3M 5M 199 M 6■ Scan types |
Related manuals for Icom IC-E7
manualsdatabase
Your AI-powered manual search engine