102 Configuring Enterprise Edge ServicesEnterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01User preferencesThe User preferences settings allow you to do the same programming that users cando at their telephones. If the attached set is not an Enterprise Edge set, these optionsare not available.To configure User preferences settings:1. Choose Services, Telephony Services, Terminals & sets.2. Click the telephone set (DN 221-528).3. Click on the User preferences heading.4. Configure User preferences settings according to the table:Button programmingThe Button programming heading allows you to program the telephone buttonswith internal and external autodialers and programmed feature keys.1. Click on the key to expand the User preferences heading.2. Click on the Button programming heading.The list of available buttons expands.3. Click on the button you want to program.4. In the Type box, choose External autodial, Feature, Blank, or Internalautodial.5. Press Enter to refresh the screen.Setting DescriptionModel Pre-program the model of Enterprise Edge set that will use this DN(M7310). You cannot change the model if the set is already attached.Call log options Select whether the set will:Log all calls, No autologging, No one answered or Unanswered byme.Dialing options Select Standard dial, Pre-dial or Automatic dial.Language Choose the display language: English, French or Spanish.Contrast Adjust the contrast of the display 1, 2, 3,4, 5.....9Ring type Select a ring type 1, 2, 3, 4