52 Configuring Enterprise Edge ResourcesEnterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01To modify an existing item on the PPP Password List:1. From the list, click the item you want to modify. The selected item ishighlighted.2. From the menu, click Configuration and selectModify PPP User&Password. The PPP Password List dialog box appears.3. Make the necessary changes.4. Click Save to save your changes.To delete an item from the PPP Password List:1. From the list, select the item you want to delete. The selected item ishighlighted.2. From the menu, click Configuration and selectDelete PPP User&Password. A dialog box appears to ask "Are you sure youwant to delete this row?" Click Yes.Configuring WAN Summary Parameters1. Click the WAN navigation key to expand the navigation tree.2. On the navigation tree, click WAN1 or WAN2. Unified Manager displays thefollowing screens: WAN Line Parameters (if you are configuring a T1 port[North America only]), WAN Frame Relay or PPP Parameters (depending onthe link protocol selected), and PVC Congestion Control screens.Note: Clicking the WAN1 or WAN2 navigation key causes the key todisappear. You must click WAN1 or WAN2 to access the WANSummary screen.3. Use the attributes in the following table to configure Enterprise Edge WANSummary settings:Attribute DescriptionIP Address Enter the IP address of the WAN interface. The WAN IP address must be inthe following format: 255.255.255.255.You can obtain this information from your system administrator or yourInternet service provider.SubNet Mask Enter the subnet mask address of the WAN. The subnet mask IP address mustbe in the following format: 255.255.255.255.You can obtain this information from your system administrator or yourInternet service provider.Physical Address Shows the physical address of the WAN interface.