236 Configuring Enterprise Edge ServicesEnterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01Basic (stateless) Packet FilterEnterprise Edge supports basic (or stateless) packet filtering for IPX protocols.With basic packet filters, you can configure your system to:• Pass packets only from the routes listed in the filter definition.• Pass everything except the packets from the routes listed in the filter definition.To view and change the status of Firewall Filters:1. Choose Services, then click on the IP Firewall Filters heading.The Firewall Filters Summary screen appears. The Summary screen attributesare:2. Choose the status of the Firewall Filters, Enabled or Disabled.Configuring Firewall Filters for an Interface3. Choose Firewall Filters and click on the heading you want to configure. Forexample, LAN1.The Logging Settings, Log Viewing Options, Input Filters’ RuleConfiguration, Input Filters’ Rule Setting, Output Filters’ Rule Configuration,Output Filters’ Rule Setting screens appear.4. In the Logging Settings screen, choose if Logging is Disabled or Enabled.5. In the Logging Settings screen, choose the Logging Level:- Level 1 logs errors only- Level 2 logs warnings- Level 3 logs everything6. In the Log Viewing Options screen, type the Start Date and End Date (mm/dd/yyyy).This is only necessary if you wish to view existing logging data.Note: You can configure rules two ways; using default rules, or, setting upindividual rules.Attribute DescriptionDescription Shows a description of Firewall Filters.Version Shows the version number of the subsystem.Status Shows the status of Firewall Filters. This box also provides commands toenable or disable Firewall Filters.Possible values: Disabled, EnabledThe default value is: Disabled
