Appendix A: Network Examples 361P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations GuideRouting information for DPNSS network example.For more information on creating a private numbering plan with DPNSS, refer to• Guidelines for creating a private numbering plan with DPNSS on page 361• Customizing the routing service on page 362Guidelines for creating a private numbering plan with DPNSSUse the following guidelines when creating a private numbering plan with DPNSS.• When creating HLCs for the nodes in your system, avoid numbering conflictsbetween network nodes and internal DNs, Hunt Group DNs.• Program a Private Access Code into your dest routing tables to avoid conflictswith your internal HLC and dest code numbering plan. For example, if a dialoutHLC is 848, but this number already exists in the Norstar system for anextension, the routing tables should add a Private Access Code to the dest code.If the code is programmed as “6”, the dest code becomes 6848. 6848 uses aroute to dial out 888 using the DPNSS line pool, allowing the call to be placed.Note that a Private Access Codes is required only for specific DPNSS featuressuch as Diversion, Route Optimization, and Redirection.Heading Parameter SettingPrivate Network: (for each branch Enterprise Edge)Routing Service Route 001Dial out # No numberUse Pool NDN type none (private access code 6 is programmed)Destination Code 6Normal route 001Absorb 1Public Network:Routing Service Route 002Dial out # No numberUse Pool NDN type publicDestination Code 9Normal route 002Absorb 1
