Appendix A: Network Examples 369P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations GuideThe branch office only routes out one call at a time on the redirected line. If thetarget line is busy, the next incoming call will go to the prime set and not beredirected.Hardware: Enterprise Edge, an EE-DTM with one T1 E&M line or one T1 DIDline.TipsAny line appearance on a telephone can be selected as the incoming line to beredirected. Restriction filter restrictions on the line are checked against thefilter in effect at the time a call is redirected not when redirection isprogrammed.A target line can not be selected as the outgoing line for redirection. Theincoming trunk must have disconnect supervision.Heading Parameter SettingIncoming trunk:Trunk/Line Data Line 061: T1 LoopTrunk mode: SuperAnswer mode: AutoORLine 065: T1 DIDORLine 065: T1 E&MAnswer mode: AutoReceived #: 4321(for target line 232)Incoming trunk:Trunk/Line DataRec'd # length Received # length: 4 digits(can be from 2 to 7 digits, butmust match number of digitssent by central office)Rec'd # lengthOutgoing trunk:Trunk/Line Data Line 062: T1 LoopORLine 066: T1 E&MOutgoing trunk:Trunk/Line DataCapabilities Allow redirect: Y Capabilitiesredirected callbranch officeincoming callline 3targetline241 main office
