Configuring Enterprise Edge Services 191P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations Guide3. Configure the VoIP Remote Gateway attributes according to the table below:4. Click the Save button.To modify remote gateways:1. In the Remote Gateway table, click the remote gateway you want to modify.2. On the Configuration menu click Modify Entry.The Remote Gateway screen appears.3. Modify the Remote Gateway attributes.4. Click the Save button.To delete remote gateways:1. In the Remote Gateway table, click the remote gateway you want to delete.2. On the Configuration menu, click Delete Entry.A message appears that asks you to confirm the deletion.3. Click the Yes button to confirm the deletion.Setting DefinitionName Allows you to specify a logical name for the remote VoIP gateway. You canedit this setting only when you add a new gateway entry. While you modify anexisting entry, this name cannot be changed.Destination IP Allows you to specify IP Address for the remote VoIP gateway. You can enter afully qualified DNS Name or just host name (where applicable) or IP address indotted format. Press the Tab key.QoS Monitor Allows you to enable or disable QoS Monitor for this VoIP gateway.TransmitThresholdAllows you to specify the transmit threshold while interacting with this VoIPgateway. Press the Tab key.ReceiveThresholdAllows you to specify the receive threshold while interacting with this VoIPgateway.Gateway Type Allows you to specify the VoIP gateway type. VoiceNet is the only permittedvalue in Release 2.0.DestinationDigitsAllows you to specify the destination digits for this gateway. When the localgateway sees this prefix, it forwards the call to the VoIP gateway at thespecified destination IP Address. Press the Tab key.
