Configuring Enterprise Edge Resources 53P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations Guide4. Press the TAB key to save your settings.Note: Unified Manager refreshes the link protocol screen according to thechoosen protocol. Your choice of protocol depends on the existingnetwork or on the service you buy from your Internet service provider.Frame relay is the default link protocol. If you change the link protocolthe following message appears "Reminder! Previous setting requiresrebooting the system to take effect. Please reboot the system..." ClickOK.Setting WAN Line ParametersThe WAN Line Parameters screen is displayed when configuring a T1 port (NorthAmerica only). Enterprise Edge supports T1 and fractional T1. Refer to the Portbox on the WAN Summary Parameters screen to see which type of port your areconfiguring.Description Provides a description of the network interface card that supports the WANconnection.Port Shows the port type of the WAN interface.Version Shows the version of the WAN interface.Speed Shows the operational speed of the WAN interface.Status Shows the current resource status of the WAN interface.The possible states are:Up: The resource is operational.Down: The resource is not operational.Link Protocol Lets you select a WAN link protocol. The options are Frame Relay or PPPprotocol.The default is Frame Relay.If you change the link protocol, the configuration screen changes to includefields corresponding to the link protocol you choose. To ensure properoperation, always refresh the page by clicking View and then Refresh.The link protocol to choose depends on the existing network or on the serviceyou buy from you Internet services provider.Compression Lets you enable or disable data compression. The possible values are:Enabled, DisabledThe default is Disabled.Frame Size Lets you specify the maximum frame size for the layer-2 packet carried onthis port. The default is 1600.Reboot the systemYou must remember to reboot your system for the changes you made to thelink protocol to take effect. You can continue Enterprise Edge Resourcesconfiguration and reboot the system at a convenient time.Attribute Description
