Configuring Enterprise Edge Services 141P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations GuideLine settingsFor Ringing service, Ring group and Auxiliary ringer use are programmed foreach line individually.Ring groupYou can assign a predefined ring group to a line for each schedule. See Ring groupon page 141 to create groups of extra ringing telephones.7. Choose Schedules, Line settings.8. Click on the line number (for example, Line 061).The schedule/line number window appears.9. Type in a ring group number (001-100) to choose a different ring groupassignment.Aux ringerIndicate whether the auxiliary ringer (if installed) also rings when Ringing serviceis on.10. Click Y or N to enable Auxiliary ringer.Restriction serviceIndicate how the alternate dialing restrictions are activated for each of theschedules:1. Choose Services, Telephony Services, Scheduled Services, Restrictionservice.2. Select the schedule you want to program, (for example, Night).The schedule window appears.TipOnly one ring group can be assigned to a line for each schedule. To combinegroups of ringing sets, you must create a new ring group which contains all thesets you want to ring and assign it to the line.TipsThe default ringing telephone is 221. This means that all lines ring at telephone221 when Ringing service is on.You can copy Ringing set and Auxiliary ringer programming from one line toanother.If you have an auxiliary ringer programmed to ring for calls on an externalline, and you transfer a call on that line without announcing the transfer, theauxiliary ringer will ring for the call transfer.
