214 Configuring Enterprise Edge ServicesEnterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01Adding SAP filters for IPX routingOn a Novell network, the Service Advertising Protocol (SAP) provides networkcontrol information about available services on a Novell network. You can defineand add SAP filters for IPX routing.1. Choose Services, IPX Routing and click on the interface that you want toconfigure.2. On the Configuration menu click Add SAP Input Filter or Add SAPOutput Filter.3. Use the table below to set your SAP Input or Output filter parameters for IPXrouting:4. Click Save.Adding Static Routes for IPX RoutingYou can add static routes to the IPX routing table. The IPX static routes takeprecedence over the routes added by routing protocol such as RIP.1. Click on the IPX Routing key to expand the heading.2. Click on the LAN or WAN interface that you want to configure. For example,LAN1.3. Under the Configure menu choose Add Static Route.The Static Routes dialog box appears.4. Configure the LAN1 (and WAN1, WAN2, etc.) static routing table attributesaccording to the table below.Attribute DescriptionInput Filter(SapIF#)Allows you to give a number to the input filter you are creating.Output Filter(SapOF#)Allows you to give a number to the output filter you are creating.Service Type Allows you to specify the SAP service type. Use a 2 byte hexadecimalnumber. You can use the value 0xFFFF to match services of any type.Service Name Allows you to enter the service name. You can use a wildcard service namesuch as "*" to indicate all service names.
