226 Configuring Enterprise Edge ServicesEnterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01To set the QoS port ranges:1. Choose QoS and click on the PortRanges heading.The QoS PortRanges screen appears.To modify port ranges:1. In the Port Ranges table, click the port ranges you want to modify.2. On Configuration menu, click Modify Port Ranges.The Port Ranges screen appears.3. In the Begin box, type the beginning value for the range.This must be an even value.4. In the End box, type the appropriate end value for the range.5. Click the Save button.To add port ranges:1. On the Configuration menu, click Add Port Ranges.The Port Ranges dialog box appears.2. In the PortRange (R#) box, type the port range number.Type an entry that looks like “Rxx” where “xx” is a unique number.3. In the Begin box, type the beginning value for the range.This must be an even value.4. In the End box, type the ending value for the range.5. Click the Save button.Note: If the rest of your network is not diffserv capable, you can set filters inother routers to give higher priority to VoIP traffic. In all the routersthat carry VoIP traffic from the Enterprise Edge server, you must setfilters that classify the traffic to and from these port ranges as highpriority.To delete port ranges:1. In the PortRanges table, click the port range you want to delete.2. On the Configuration menu, click Delete PortRanges.A message appears that asks you to confirm the deletion.3. Click the Yes button to confirm.
