Configuring Enterprise Edge Services 91P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations GuideCopying settings from one telephone set to anotherThe Copy command allows you to duplicate programming for a telephone andapply it to another telephone, a range of telephones or all the telephones on thesystem.To copy telephone settings:1. Choose Services, Telephony Services, Terminals & sets.2. Click the telephone set (DN 221-528) with the settings you want to copy.If necessary, choose a subheading to refine your selection.3. On the Edit menu, click Copy.4. Choose the data type you want to copy, System data or System+user data.5. Click Single, Range or All from the Copy type list.6. Type the DN number of the set or the range of sets (nnn-nnn) where you wantto copy the settings. You do not have to fill in this box if you chose All in theCopy type list.7. Click the OK button.GeneralThe General attributes allows you to assign the name, the DN type, a control set,and the Call log password for a set.NameThe default name for a telephone is its DN. You can change it to a more descriptivename.To assign a name to a telephone:1. Choose Services, Telephony Services, Terminals & sets.2. Click the telephone set (DN 221-528).3. Click General.4. In the Name box, type a name up to seven characters, and then press Enter.Note: The name can be a combination of letters and numbers.
