Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

Advanced printer menu functions 109TransformationThe Océ 9400-II allows the user to change the position of the image on theprint in the following ways: Image rotation and scaling functions. This appliesonly to vector languages and is possible only when the media saver isswitched off.Print rotationThis function allows you to set the degree of rotation applied to a print. Fourrotation values are possible: 0°, 90°, 180°, and 270°. The default is 0°. Thisfunction applies only to vector languages. Defining the print rotatio1 Press ‘Program’ to enter the main menu.2 Select the ‘CONFIGURATION’ item using t heor button.3 Press ‘next/select’ to enter the ‘CONFIGURATION ’ menu.4 Select the ‘ PLOT MANAGER ’ item using t heor button.5 Press ‘next/select’ to enter the ‘ PLOT MANAGER ’ menu.6 Select the ‘ TRANSFORM ’ item using the or button.7 Press ‘next/select’ to enter the ‘ TRANSFORM ’ menu.8 Select the ‘ ROTATION ’ item using t heor button.9 Press ‘next/select’ to enter the ‘ ROTATION ’menu.10 Select the required value using th eor button.11 Press ‘next/select’ to confirm the setting.12 Press ‘Program’ to exit the main menu.Print scalingThe X-scale and Y-scale can be individually set to values ranging from 0.05 to20.0. The default is 1.0. This function applies only to vector languages. Defining print scalin1 Press ‘Program’ to enter the main menu.2 Select the ‘CONFIGURATION’ item using t heor button.3 Press ‘next/select’ to enter the ‘CONFIGURATION ’ menu.4 Select the ‘ PLOT MANAGER ’ item using t heor button.