Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

Print jobs 732 Select ‘ MEDIA SETTING ’ item using the or button.3 Press ‘next/select’ to enter the ‘ MEDIA SETTING’ menu .4 Select the ‘ PLOT POSITION ’ item using the or button.5 Press ‘next/select’ to enter the ‘ PLOT POSITION ’ menu.6 Select the ‘ PLOT CENTER ’ item using the or button.7 Press ‘next/select’ to enter the ‘ PLOT CENTER ’ menu.8 Select the ‘ ON / OFF ’ using th eor button.9 Press ‘next/select’ to confirm the setting.10 Press ‘Program’ to exit the main menu.Leading/trailing edgeThe leading edge setting can be used to add a white strip at the top of the image.The page length will increase accordingly.The trailing edge setting can be used to add a white strip at the end of theimage. The page length will increase accordingly.Note: The leading/trailing edge option only works if the cut method is set tosynchro cut.The value for the trailing or leading edge can be set from 0 to 80 mm (inincrements of 5 mm) or 0 to 3 inch (in increments of 1/4 inch). Programming leading or trailing edg1 Press ‘Program’ to enter the main menu.2 Select ‘ MEDIA SETTING ’ item using the or button.3 Press ‘next/select’ to enter the ‘ MEDIA SETTING’ menu .4 Select the ‘ PLOT POSITION ’ item using the or button.5 Press ‘next/select’ to enter the ‘ PLOT POSITION ’ menu.6 Select the ‘ TRAILING ’ or ‘ LEADING EDGE ’ item using t heor button.7 Press ‘next/select’ to enter the ‘ TRAILING’or ‘ LEADING EDGE ’ menu.8 Select the required value using th eor button.9 Press ‘next/select’ to confirm the value.10 Press ‘Program’ to exit the main menu.