Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

26 Océ 9400-II User Manual8 Select the ‘ID ’ item using the or button.9 Press ‘next/select’ to enter the ‘ID ’ menu.10 Select the required ‘ ID ’ (a value from 0 to 7) using theor button.11 Press ‘next/select’ to confirm the selected ‘ ID ’.12 Press ‘Program’ to exit the main menu.13 Switch the printer off and then on again to activate the configured settings. Defining the terminatoThe termination should be set to ‘ON’ if the Océ 9400-II is the last device onthe SCSI-2 chain. It should be set to ‘OFF’ if it is placed between other devices.1 Press ‘Program’ to enter the main menu.2 Select the ‘C ONFIGURATION ’ menu using th eor button.3 Press ‘next/select’ to enter the ‘CONFIGURATION ’ menu.4 Select the ‘C ONNECTIONS ’ menu using th eor button.5 Press ‘next/select’ to enter the ‘CONNECTION ’ menu.6 Select the SCSI-2 item using t heor button.7 Press ‘next/select’ to enter the SCSI-2 menu.8 Select the ‘TERMINATION ’ item using the or button.9 Press ‘next/select’ to enter the ‘TERMINATION ’ menu.10 Select ‘ON / OFF ’ using the o r button.11 Press ‘next/select’ to confirm the required selection.12 Press ‘Program’ to exit the main menu.13 Turn the printer off and then on again to activate the configured settings.