Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

40 Océ 9400-II User ManualInserting a new print material rollBefore using the copier for the first time, you must specify the order in whichthe paper formats appear on the scanner operating panel.You can do this bychoosing between ISO, ANSI or ARCHITECT paper format on the printeoperating panel. Setting the media format1 Press ‘Program’ to enter the main menu.2 Select the ‘CONFIGURATION ’ item using t heor button.3 Press ‘next/select’ to enter the ‘CONFIGURATION ’ menu.4 Select ‘PLOT MANAGER ’ using the o r button.5 Press ‘next/select’ to enter the ‘PLOT MANAGER ’ menu.6 Select ‘MEDIA FORMAT ’ using th eor button.7 Press ‘next/select’ to enter the ‘MEDIA FORMAT ’ menu.8 Select the required format using th eor button.9 Press ‘next/select’ to confirm the selected format.10 Press ‘Program’ to exit the main menu.If the message ‘ROLL EMPTY’ appears in the display, you must load a newroll of print media. Depending on your configuration, you can reload roll 1and/or roll 2.Note: After reloading, the plot is reprinted automatically.Automatic roll switchingIf a roll becomes empty, the printer reports a roll empty error. When thishappens, printing also stops. The printer clears the paper path and generates amessage to indicate that the printer is ready to accept a new print command. Ithe correct material type and format is on the other roll, the printer will use thatroll and will resume printing automatically.If there is no match of material type and format, you must refill the empty roll.