Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

76 Océ 9400-II User ManualIntroductionThe Océ 9400-II can also be used to digitize analog drawings and upload themto a host computer over a SCSI-2 interface. The Scan-to-file option is used fothis purpose.This option consists of the following components: Océ Scan Station software Océ View Station software SCSI-2 board (option) in the PC to connect to the Océ 9400-I SCSI-2 cable (option) Making uploadAfter everything has been installed correctly on the Océ 9400-II and on the PC,both systems must be connected with a SCSI-2 cable before uploads can takeplace. See ‘SCSI-2’ on page 2 5 .1 Turn on the Océ 9400-II and the PC.2 Start the Upload application, set all scan parameters as required, and thenproceed as described below. (See also the Océ 9400 Series Scan Stationmanual).As soon as the upload is started with the application, the Océ 9400-II printerpanel displays “SCANMODE”, signifying that the system is ready to performuploads.3 Insert an original in the scanner, specify the required settings on the scanner'soperating panel and press the Start button on the scanner (see also the notesbelow).4 Once the original has been scanned and transported back to its start position, acheckplot may be performed. In order for a checkplot to take place, thecorresponding option should have been selected in the Scan Stationapplication. The checkplot is created on the media selected on the scanner'soperating panel.5 At this point, the Océ 9400-II controller creates a file which will be uploadedto the PC.Once the file has been uploaded, it can be viewed on the PC.6 Settings can be modified on the PC or on the scanner and a subsequent originalcan be scanned, or the current original can be re-scanned with the new settings.7 The upload process can be halted on the PC, thus freeing the Océ 9400 seriesfor print and/or copy jobs. (See also the Océ 9400 series Scan Station manual).