Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

92 Océ 9400-II User Manual4 Select the ‘DATA FORMAT ’ item using the or button.5 Press ‘next/select’ to enter the ‘DATA FORMAT ’ menu.6 Select the ‘CALCOMP SETUP ’ item using the or button.7 Press ‘next/select’ to enter the ‘CALCOMP SETUP’menu.8 Select the ‘CHECKSUM ’ item using the or button.9 Press ‘next/select’ to enter the ‘CHECKSUM ’ menu.10 Select ‘YES ’ or ‘ NO ’ using th eor button.11 Press ‘next/select’ to confirm the selected setting.12 Press ‘Program’ to exit the main menu.CalComp pen priorityYou can define pen parameters in the print file, either in a remote configurationfile or from the printer control panel. The pen priority option allows you todefine which set of pen parameters you want to use.If ‘Language’ is selected, the pen parameters defined in the data file will beused. If Setup’ is selected, the pen parameter defined on the printer operatingpanel, or in the optional remote configuration file, will be used. The default isLanguage.1 Press ‘Program’ to enter the main menu.2 Select the ‘C ONFIGURATION ’ item using the or button.3 Press ‘next/select’ to enter the ‘CONFIGURATION ’ menu.4 Select the ‘DATA FORMAT ’ item using the or button.5 Press ‘next/select’ to enter the ‘DATA FORMAT ’ menu.6 Select the ‘ CALCOMP SETUP ’ item using the or button.7 Press ‘next/select’ to enter the ‘ CALCOMP SETUP’ menu.8 Select the ‘PEN PRIORITY ’ item using the or button.9 Press ‘next/select’ to enter the ‘PEN PRIORITY ’ menu.10 Select the required pen priority using the o r button.11 Press ‘next/select’ to confirm the selected pen priority.12 Press ‘Program’ to exit the main menuMerge modeThis option determines what happens when two or more colors intersect at thesame point of a plot, especially in area fills. The default setting is ‘On’.