Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

Copy jobs 61Copying using manual feedIf you want to copy a job on a media type and/or size that is not available onthe media rolls, you might prefer to feed the sheets manually instead ofchanging the rolls. The sheet feeder is a special slot located just above thepaper roll drawers on the print engine.You can insert pre-cut copy media intothis slot, one sheet at a time. See also ‘Printing using the manual feed’ onpage 48.Before using manual feed, you will have to program the media settings. See‘Programming media settings’ on pag e49. Selecting manual fee1 Feed in the original, in portrait orientation.2 Press the ‘media’ button until the manual feed indicator lights up.3 Adjust other settings as required.4 Press the ‘start’ button.5 Wait for the‘FEED SHEET’ message in the printer display.6 Feed in the copy material, in portrait orientation (minimum length 420 mm[16.5"]).7 Hold the paper until the engine pulls in the first part of the sheet.Attention If the sheets of copy material are curled, feed them in with thcurl facing down to avoid damaging the drum8 If the copy job requires more sheets, the printer display will ask you to feed inthe next sheet.9 To complete the job, repeat steps 5 to 8.[24] Manually feeding in a sheet of paper