Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

24 Océ 9400-II User Manual5 Press ‘next/select’ to enter the ‘CONNECTION ’ menu.6 Select the ‘CENTRONICS’ item using the or button.7 Press ‘next/select’ to enter the ‘CENTRONICS’ menu.8 Select the ‘ECP ’ mode using theor button.9 Press ‘next/select’ to enter the ‘ECP ’ menu.10 Select the required setting usi ng theor button.11 Press ‘next/select’ to confirm the selected type.12 Press ‘Program’ to exit the main menu. Defining the end-of-plot time-ouNormally, print files end with an instruction that tells the printer that the file isfinished.However, some print data files do not have an end-of-print instruction. In thiscase, the print will be considered ‘finished’ when the printer stops receivinggraphic commands over the Centronics interface.The print time-out option sets the delay after which the print is consideredfinished. You can choose between 15, 30, 180, or 500 seconds. The default is180.1 Press ‘Program’ to enter the main menu.2 Select the ‘CONFIGURATION ’ item using t heor button.3 Press ‘next/select’ to enter the ‘CONFIGURATION ’ menu.4 Select the ‘CONNECTION ’ item using the or button.5 Press ‘next/select’ to enter the ‘CONNECTION ’ menu.6 Select the ‘CENTRONICS’ item using the or button.7 Press ‘next/select’ to enter the ‘CENTRONICS’ menu.8 Select the ‘PLOT TIME OUT ’ item using t heor button.9 Press ‘next/select’ to enter the ‘PLOT TIME OUT ’ menu.10 Select the required plot time-out usi ng theor button.11 Press ‘next/select’ to confirm the selected plot time-out.12 Press ‘Program’ to exit the main menu.