Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

Customizing the printer 91CalCompThe Océ 9400-II supports use of the CalComp graphics language.CalComp print originThe term “print origin” refers to the point on the paper at which a drawingstarts: upper right, upper left, center, lower right and lower left.The default CalComp origin is lower right. This print origin is used for allCalComp files, whether the format is set to CalComp or Auto, even if a remotecontrol command for CalComp is sent. Defining the print origi1 Press ‘Program’ to enter the main menu.2 Select the ‘CONFIGURATION’ item using t heor button.3 Press ‘next/select’ to enter the ‘CONFIGURATION ’ menu.4 Select the ‘ DATA FORMAT ’ item using t heor button.5 Press ‘next/select’ to enter the ‘ DATA FORMAT ’ menu.6 Select the ‘CALCOMP SETUP’ item using t heor button.7 Press ‘next/select’ to enter the ‘ CALCOMP SETUP ’ menu.8 Select the ‘ ORIGIN ’ item using t heor button.9 Press ‘next/select’ to enter the ‘ ORIGIN ’ menu.10 Select the required origin item using t heor button.11 Press ‘next/select’ to confirm the selected origin.12 Press ‘Program’ to exit the main menu.Checksum parameterThe checksum parameter is significant in all cases in which the CalCompformat is selected or auto-recognized, and select format is set to Auto or aremote control command for CalComp has been sent. The default is ‘Yes’. Defining the checksum paramete1 Press ‘Program’ to enter the main menu.2 Select the ‘CONFIGURATION’ item using t heor button.3 Press ‘next/select’ to enter the ‘ CONFIGURATION ’ menu.