Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

110 Océ 9400-II User Manual5 Press ‘next/select’ to enter the ‘PLOT MANAGER ’ menu.6 Select the ‘TRANSFORM ’ item using the or button.7 Press ‘next/select’ to enter the ‘TRANSFORM ’ menu.8 Select the ‘SCALING ’ item using t heor button.9 Press ‘next/select’ to enter the ‘SCALING ’ menu.10 Select the required scaling method using th eor button.11 Press ‘next/select’ to enter the appropriate menu.Follow the procedure below to define scaling for the X and Y axesindividually:12 Select the required setting usi ng theor button.13 Press ‘next/select’ to confirm the setting.14 Press ‘Program’ to exit the main menu.Note: When autoscale is selected, x-scaling and y-scaling are not applicable.AutoscalingThe purpose of Autoscale is to apply exact ISO/ANSI/Architect formats todocuments. The same scaling factor is applied to the X and Y axis. An autorotation can be performed to attain the best auto scale factor.Although the Media Saver and the Autoscaling Mode are controlled separately,they do interact.Autoscale mode can be activated in two ways: autoscale to a predefined format (ISO/ANSI/Architect) best fitThe user can combine Autoscale and Autoposition: plots are first autoscaled(best fit or scale to format, if required), and then autopositioned (if required).Fit-to-Format Mode:All drawings, regardless of size, are reduced/enlarged to one specific standardsize. This option can be combined with the Media Saver option.The list of predefined formats depends on the media format selected via theprinter operating panel.Users can enlarge drawings to poster size in order to make presentations tolarge audience. They can also reduce documents to easily mail them or archivethem in standard A3 (11x17") or A4 (8.25x11") books.