Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

Customizing the printer 95 Setting the double synchronization code paramete1 Press ‘Program’ to enter the main menu.2 Select the ‘CONFIGURATION’ item using t heor button.3 Press ‘next/select’ to enter the ‘CONFIGURATION ’ menu.4 Select the ‘ DATA FORMAT ’ item using t heor button.5 Press ‘next/select’ to enter the ‘ DATA FORMAT ’ menu.6 Select the ‘ CALCOMP SETUP’ item using t heor button.7 Press ‘next/select’ to enter the ‘ CALCOMP SETUP ’menu.8 Select the ‘ DOUBLE SYNC ’ item using t heor button.9 Press ‘next/select’ to enter the ‘ DOUBLE SYNC ’ menu.10 Select the required double sync using the o r button.11 Press ‘next/select’ to confirm the selected value.12 Press ‘Program’ to exit the main menu.CalComp step sizeIf the data format type is set to CalComp (manual, auto selection or remotecontrol command), seven steps or increments are provided (100 dpi to 4064dpi). The default is 2032. Setting the appropriate step size1 Press ‘Program’ to enter the main menu.2 Select the ‘CONFIGURATION’ item using t heor button.3 Press ‘next/select’ to enter the ‘CONFIGURATION ’ menu.4 Select the ‘ DATA FORMAT ’ item using t heor button.5 Press ‘next/select’ to enter the ‘ DATA FORMAT ’ menu.6 Select the ‘ CALCOMP SETUP’ item using t heor button.7 Press ‘next/select’ to enter the ‘ CALCOMP SETUP ’menu.8 Select the ‘ STEP SIZE ’ item using t heor button.9 Press ‘next/select’ to enter the ‘ STEP SIZE ’menu.10 Select the required value using th eor button.11 Press ‘next/select’ to confirm the selected value.12 Press ‘Program’ to exit the main menu.