Copy jobs 57Making copiesThe copying process starts after you press the ‘start’ button. You can changethe settings before pressing the ‘start’ button. Feeding in the origina1 Insert the original, face down and aligned to the right, along the original guideon the scanner feed table, so that the line is completely visible (see f igure23).[23] Inserting the originalThe original will be transported about 1 centimeter (0.4") to a predefinedposition.2 Now you are ready to change settings or to start the copy process (see ‘Startingthe copy process’ on pa ge57).If you make a copy before the 1-minute time-out expires, the machine will usethe settings of the previous copy job.Starting the copy processIf you press the 'start' button without changing any settings, the machine willeither use the settings of the previous copy job, or its own default settings,which are as follows: number of copies 1 using roll 1 zoom 100% synchro cut
