Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

60 Océ 9400-II User ManualChanging settingsIn order to perform special copy jobs, the Océ 9400-II allows you to changethe settings to fit your requirements. This section explains in detail how tochange these specific settings.Number of copiesIf you want multiple copies from one original, you will need to enter thedesired number of copies on the scanner operating panel. The number of copieswill count down on the operating panel of the printer. The original will only bescanned once and the required number of copies will be processed.See ‘Product specifications for the scanner’ on page129 for information on thelimitation of multiple copy jobs. Selecting the number of copie1 Enter the number of copies (1 to 19), using the '+' or '-' buttons on the scanneroperating panel.The number of copies appears on the display.Copying using roll 1 or roll 2You can choose between the two rolls by pressing the ‘ media’ button. Once aroll has been chosen, the copy media is taken from the selected roll.Note: Only use paper as specified in ‘Copy material that can be used’ onpage 135. Selecting roll 1, roll 2, or manual fee1 Press the 'media' button until the indicator corresponding to your choice lightsup.