Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

64 Océ 9400-II User ManualAdjusting the leading/trailing edgeYou can increase the length of the copy to accommodate a filing strip, byselecting a positive leading/trailing edge.If you don’t want the filing strip to show on the copy, you can remove it byselecting a negative leading or trailing edge. The adjustment increments inmillimeters or inches appear on the operating panel. Adjusting the leading/trailing edg1 Press the edge’ button to toggle between leading and trailing edge.2 Press the up’ or ‘down’ button to select the required leading/trailing edgevalue. The length of the currently selected edge appears in the display.If you use this button to make adjustments, the indicators above the button willflash. If the adjustment differs from the default setting, the indicator willremain on. Confirm the setting by pressing the zoom, edge, cut, media or startbuttons.Attention: Be aware that decreasing the edges too much may result in a lossof informationThe method of adjusting the leading/trailing edge varies, depending onwhether you are using roll feed or manual feed (see ‘Leading/trailing edgewhen copying on rolls of paper’ on pa ge65) and Leading/trailing edge whencopying onto a sheet of paper’ on pag e66).