90 Océ 9400-II User Manual9 Press ‘next/select’ to enter the ‘MERGE ’ menu.10 Select ‘YES ’ or ‘ NO ’ using th eor button.11 Press ‘next/select’ to confirm the selected setting.12 Press ‘Program’ to exit the main menu.HP-RTLHP-RTL is a subset of HP-GL/2. Therefore, all HP-RTL plot data files muststart with ESC%-1BBPIN: or BPIN.To use HP-RTL, the SELECT FORMAT should be set to AUTO or HP-GL/2on the operating panel, or HP-GL/2 must be selected via a remote control file.Note: HP-RTL plot data files must end with ESC%OB; PG; which will switchthe printer back to HP-GL/2 format mode. Without this command, the plotresults will be unpredictable and the printer will stop.The following HP-RTL statements are not recognized by the Océ 9400-II andwill be treated as no-ops: ESC*v#a, ESC*v#b, ESC*v#c, ESC*v#i,ESC*v#W[data], ESC*b#l and ESC&b#V[data].
