Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

28 Océ 9400-II User ManualUTP (unshielded twisted pair) cable looks much like standard phone cable.The cable should have RJ45 plugs.If you are using the Ethernet port, you will need to configure a list oparameters. All required parameters are described in the following procedures. Connecting Etherne1 Connect one end of the Ethernet cable to the computer’s Ethernet port.2 Connect the other end to the printer’s Ethernet port (see f igure8).[8] Ethernet port Setting up the TCP/IP protocoYou must configure the printer IP address, subnet mask and default gateway IPaddress (consult your local network administrator). Each of these fouaddresses is composed of 4 numeric fields ranging from 0 to 255. For example:194.2.66.146 or 255.255.255.0. The menu presents these fields in thefollowing order: field 0, field 1, field 2, field 3.1 Press ‘Program’ to enter the main menu.2 Select the ‘C ONFIGURATION ’ menu using th eor button.3 Press ‘next/select’ to enter the ‘ CONFIGURATION ’ menu.4 Select the ‘C ONNECTIONS ’ menu using th eor button.5 Press ‘next/select’ to enter the ‘ CONNECTION ’ menu.6 Select the ‘ETHERNET ’ item using the or button.7 Press ‘next/select’ to enter the ‘ ETHERNET ’ menu.8 Select the ‘IP ADDRESS ’ menu using th eor button.9 Press ‘next/select’ to enter the ‘ IP ADDRESS ’ menu.10 Select the ‘FIELD 0’ menu using th eor button.11 Press ‘next/select’ to enter the ‘ FIELD0’ menu.12 Enter the ‘FIELD 0’ number of your ‘ IP ADDRESS’ using the o r button.RJ45