(Re)load media and toner 436 Place the roll holder with the material in the drawer (see figu re12).[12] Repositioning the roll7 Feed the material between the input guide plates against the rollers.8 Turn the rollers until the material is visible (see f igure13). You can also referto the sticker inside the drawer.[13] Feeding the material9 If you have inserted a roll with a different material or of a different width, youmust program the correct width and material type (see ‘Programming mediasettings’ on pag e49).If you want to cut the paper to get a straight leading edge, see ‘Cutting thepaper to get a straight leading edge’ on page 4 4 .Otherwise, continue with the next step.10 Close the drawer.11 Press the ‘Cancel/Continue’ button.
