Oce 9400-I User Manual

Also see for 9400-II: User manual User manual

Contents

72 Océ 9400-II User ManualCut methodThis setting can be used to select standard cut or synchro cut (see ‘Order ofstandard sizes for using standard cut’ on pag e138).Note: Use Synchro Cut when you must define a non-standard paper size in yourapplication.The values selected for leading or trailing edge are taken into account whenusing Synchro Cut. Programming cut metho1 Press ‘Program’ to enter the main menu.2 Select ‘MEDIA SETTING ’ item using t heor button.3 Press ‘next/select’ to enter the ‘MEDIA SETTING ’ menu.4 Select the ‘PLOT POSITION ’ item using t heor button.5 Press ‘next/select’ to enter the ‘PLOT POSITION ’ menu.6 Select the ‘CUT METHOD ’ item using the or button.7 Press ‘next/select’ to enter the ‘CUT METHOD ’ menu.8 Select the desired cut method usin g theor button.9 Press ‘next/select’ to confirm the selected cut method.10 Press ‘Program’ to exit the main menu.Plot CenterThis setting can be used to enable or disable centering of the plot on the paper.If the center setting is disabled, the plot will be positioned in the upperleft-hand corner of the page.If Standard Cut is selected, the plot is printed and the media is cut according tothe standard cut functionality. If Plot Center in On, the plot is shifted up/downand left/right so that it is centered within the selected bounding box.Note: If you print a plot that exceeds standard length, the machineautomatically switches to synchro cut to prevent you from losing information.If Synchro Cut is selected, the bounding box of the plot sets hard clip limits. IfPlot Center is ON, the plot is shifted left/right so that it is centered on the page. Programming Plot Cente1 Press ‘Program’ to enter the main menu.