120 Océ 9400-II User ManualClearing paper jamsWhen a jam occurs, a message appears on the operating panel. If papermisfeeds occur frequently, make sure that: The roll(s) are loaded correctly and the media is fed as indicated. The correct media is used (see ‘Copy material that can be used’ o n page135). No scraps of material are blocking the paper path. Clearing paper jams in the media feed section1 Switch the printer off.2 Open the cover of the roll unit.3 Lower the feed table, using the two catches on the front of the printerunderneath the feed table (see figure 33).[33] Lowering the feed table4 Remove the jammed material.Note: Check thoroughly to make sure that no scraps of material remain.5 Close the feed table.6 Close the cover of the roll unit.7 Turn the printer on.
