8 [Administration] Tab Page140 [Setup] Item List Setting up Energy SaveYou can set Energy Save mode for your equipment.For information on types of Energy Save mode and how to enter the mode, see the User’s Manual Setup Guide.The following network settings are required for this equipment to enter the Sleep mode.y Select [Disable] for [Enable IPv6] or select [Manual] for [Link Local Address] in the IPv6 setting.P.147 “Setting up IPv6”y Select [Disable] for [Enable IPX/SPX] in the IPX/SPX setting.P.148 “Setting up IPX/SPX”y Select [Disable] for [Enable Apple Talk] in the Apple Talk setting.P.149 “Setting up AppleTalk”y Specify one of the following in [POP3 Network Service].- [Disable] for [Enable POP3 Client].- No entry for [POP3 Server Address].- No entry for [Account Name].- 0 for [Scan Rate].P.161 “Setting up POP3 Network Service”y Disable IEEE 802.1X authentication.For the IEEE 802.1X authentication method under the wired LAN environment, refer to the following chapter in theUser’s Manual Advanced Guide.Chapter 2: "SETTING ITEMS (ADMIN) - IEEE 802.1X Authentication Setting"See the following page for network access settings for your equipment in the Sleep mode:P.170 “Setting up Wake Up Setting” Setting up Date & TimeYou can set the date, time, time zone, and date format.[Date & Time] settings are not available if the SNTP function is enabled.Item name Description1 Auto Clear Select how long your equipment can remain inactive before the touch panel automaticallyreturns to the default display.2 Auto Power Save Select how long your equipment can remain inactive before entering Automatic EnergySave mode.3 Sleep Timer Select how long your equipment can remain inactive before it automatically enters the Sleepmode.4 Sleep Mode Select the Auto, Sleep, or Shut off mode after the specified [Sleep Timer] time.Item name Description1 Year/Month/Date/Time Select the year and month in designated boxes. Also, enter the date and time in designatedboxes.2 Time Zone Select the time zone where this equipment is located.3 Date Format Select the date format.1234123
