8 [Administration] Tab Page206 [Setup] Item List Print Service settingsYou can configure such print services as Raw TCP Print, LPD Print, IPP Print, FTP Print, NetWare Print, and Email Print.The [Print Service] submenu can be accessed from the [Setup] menu on the [Administration] tab.See the following pages for how to access it and information on the [Setup] menu:P.22 “Access Policy Mode”P.136 “[Setup] Item List”Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated bypressing the [RESET] button on the control panel or after an Auto Clear time period. Setting up Raw TCP PrintIn Raw TCP Print, you can enable or disable the Raw TCP print service. Setting up LPD PrintIn LPD Print, you can set the LPD print options to enable the LPD/LPR print service.P.206 “Setting up Raw TCP Print” P.208 “Setting up FTP Print”P.206 “Setting up LPD Print” P.208 “Setting up NetWare Print”P.207 “Setting up IPP Print” P.209 “Setting up Email Print”Item name Description1 Enable Raw TCP Enable or disable Raw TCP print service. [Enable] is set as the default.2 Port Number If enabling the Raw TCP, enter the Raw TCP port number for the Raw TCP print. You canenter a value in the range from 1024 to 32767. Generally the default value "9100" is used.When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting isenabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you set it by mistake, use the control panel ofthe equipment to change the HTTP setting and enter the correct port number.3 Enable Raw bi-directional Enable or disable Raw bi-directional communication. [Disable] is set as the default.Item name Description1 Enable LPD Enable or disable LPD print service. [Enable] is set as the default.2 Port Number Enter the port number for LPR printing. You can enter a value in the range from 1 to 65535.Generally the default value "515" is used.When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting isenabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you set it by mistake, use the control panel ofthe equipment to change the HTTP setting and enter the correct port number.3 Banners Select whether to print a banner page for each print job using LPR printing. [OFF] is set asthe default.123123
